1. Black self-adhesive wallpaper, waterproof (PVC material)
Distinctive:
Self-adhesive support: No need for additional adhesive, just tear off the backing paper to stick.
Water and moisture resistant: Suitable for humid environments such as kitchens, bathrooms, basements, etc.
Matte/Glossy black finish: Create a modern, simple, or industrial effect.
Easy to clean: PVC surface can wipe off stains.
Application scenarios:
Wall decoration:
Partial decoration: such as the wall behind the television and the headboard wall of the bedroom.
Complete home coverage: Create a dark pattern in small spaces like the attic and café.
Commercial space: walls or sections of bars and exhibition halls.
Special fields:
Bathroom/Kitchen: Stick to the tiles or glass, ensuring that the wall is flat and free of cracks.
Furniture renewal: It is applied to old cabinets and table surfaces to enhance waterproofing.
Temporary use:
Lease renewal, exhibition planning (tearing without leaving any adhesive residue).
Construction steps:
Herbaceous root treatment: Clean the wall surface to ensure there is no dust or oily stains, and that it is flat and dry.
Cutting wallpaper: Leave a 5 cm margin to avoid adjustments when sticking it on crooked.
Slowly stick: Peel off the backing paper while using a scraper to remove any air bubbles.
Edge trimming: Use a craft knife to trim the edges, overlap them, and cut at the corners.
Matters that need attention:
Avoid sticking to walls that are powdery or peeling.
The recommended building temperature is 10-35℃ because low temperatures may cause a decrease in viscosity.
If removal is required, the adhesive surface can be heated with a hairdryer to soften it and then peeled off slowly.
